中文 | English

Multi-band Pico Repeater
UMTS850, GSM900, DCS1800, WCDMA2100 and LTE2600

MB-Pico is a cost-effective PICO amplifier supporting multiple bands especially LTE2.6G for in-building DAS or elevator coverage enhancement. Its state-of-the-art RF amplifying and transmission technologies enable high integration with excellent performance. And its compact enclosure makes the installation much more simple and quick.

MB-Pico supports either 2~5 bands of UMTS850, GSM900, DCS1800, WCDMA2100 and LTE2600.

Features

  • Advanced Multi-band Pico Repeater Supporting LTE
  • Adaptive Uplink Switch Off

    MB-Pico detects up to five-band cell phone signal automatically. In case there is no uplink power received, and the uplink path is shut off by the repeater. This function can prevent the system from the interference. In case the uplink power is detected, the repeater uplink path is opened automatically. So the communication is established.

  • Digital/Analog ALC

    With the function of digital ALC and analog ALC, the dynamic gain adjustment range is 60dB. The system ALC is double redundancy, it provide the high reliability and stability.

  • Automatic Oscillation Detection

    It has the function of oscillation automatically detection between the donor antenna and service antenna. If the isolation does not meet the requirement, there will be indicating and the repeater will reduce gain automatically till no oscillation is occurred therefore to protect the repeater and avoid interference.

  • Uplink/Downlink Gain Adjustment Synchronization

    After the system is power up, the input power is detected automatically and then the output power is adjusted. After the downlink gain is calculated by the system, the uplink gain can be adjustment equivalently. This method can balance the system amplification. The both path gain is adjusted relevantly. The system gain is less than the system path loss. So the repeater will not bring any interference and noise into the system link. One base station can hook up more than one repeater.

    The function ensures that Pico Repeater on the network without any interference noise, guarantee a base station can bring more Pico Repeater.

  • Automatic Gain Control (AGC)
  • Automatic Installation Indication - Easy to Use

    It has the function of automatic installation instruction by the display. It made installation easier and clear.

  • Remote Control & Monitoring

    • Gain and maximum output power threshold both can be set locally or remotely. You can also stop the individual band through remote control.

  • Compact in Size, no Space Limit

Applications

  • Family, living zone
  • Villa
  • Basement
  • Parking
  • Vehicle
  • High-speed railway cabin
  • Boundary
  • High density urban
  • Lift
  • Cruise ship
  • Handshake area
  • Tunnel
  • Open plain area
  • Mine
  • Blocked entertainment area
  • Bar, cafe
  • Other in-building coverage improvement